KOBOLD was tasked to provide a solution for the problem of phosphate precipitation in wastewater treatment plants. By adding Iron (III) Chloride (FeCl3) into the aeration basin, the phosphates dissolved in excess wastewater are chemically mixed with sludge flocculants and transferred with sludge to the sludge treatment stage. This process reduces phosphate concentration in waterways and minimises the potential for abnormal algae growth and the detrimental effect on the aquatic ecosystem. Because an overdose of Iron (III) Chloride results in massively polluted water - toxic to humans as well as the environment, a completely dependable method of process monitoring had to be developed.
The ideal would be a continuous flow measurement of the dosing chemical with a direct data connection to the process control system which would guarantee maximum safety and avoid possible errors which would only be discovered during sample taking when it´s too late and the damage done.
The solution is the KOBOLD MIK magnetic-inductive flow meter, an optimal and economical solution for a safe dosage of Iron (III) Chloride, and specifically developed for this application. The unit has already proven itself very successfully in service, specifically for electric conductivity liquids, acids and caustic solutions, drinking, cooling and wastewater, groundwater, raw water, aggressive or salty solutions. However it is unsuitable for oil (lacks conductivity).
The MIK is housed in polyvinylidene fluoride (PVDF) and the electrodes in contact with the medium are made of tantalum. Both materials have proven to be chemically resistant. With the directly mounted transmitter within stainless steel housing, this device forms a very compact and robust unit, ideal for fitting inside cramped control cabinets. It allows detection of very small dosage amounts from 10 mL/min.
The device operates according to the principle of electromagnetic measurement - Faraday's Law of magnetic induction - where a voltage is induced in a conductor moving through a magnetic field. The electrically conductive measuring agent acts as the moved conductor. The voltage induced in the measuring agent is proportional to the flow velocity and is,, therefore, a value for the volumetric flow. The flow rate is calculated on the cross-sectional area of the pipe. The measurement is dependent on the process liquid and its material properties such as density, viscosity and temperature. The device may be equipped with a switch, frequency or analogue output.
With an analogue 4-20 mA signal (or optional pulse output) the MIK continuously communicates the measured values to the users' process control system, so that it allows for immediate response to the latest process conditions. This results in increased efficiencies and cost savings in the amount of Iron Chloride required to achieve phosphate removal, as well as the vitally important environmental protection component.
Areas of application are flow monitoring, flow measuring, dosing and counting for machine building, chemical, paper industry, automobile, cement industries and laboratories.
595 1831 or log onto the product information at https://bit.ly/35UZvDd